If you’re wondering whether or not you deserve to use oil-based paint over latex, it really isn’t a smart decision, but it is possible. The reason professionals advise versus doing this is bereason latex paint is functional in nature, and as an outcome, oil-based paints won’t properly adright here to them.

You watching: Will latex paint stick to oil based primer

If it is not done appropriately, it renders a normal paint task take a lot much longer.

However before, if you sand the surconfront and use a sealing coat such as primer in between the different layers, you can obtain by applying oil-based paint over latex. Preparation is essential. To effectively use oil-based paint over latex, follow the procedures below:

Tip 1: Sand also the surface

As abovementioned, latex is flexible in nature. As an outcome, oil-based paint won’t correctly adhere to latex unless you sand also the surface and also add primer between each of the layers. Start by equipping yourself through a item of P80 grit sandpaper and also attempt to remove as a lot of the latex from the surchallenge.

You deserve to also use a sanding block. By removing the latex from the surchallenge, the oil-based paint will certainly adbelow much much better than if the latex was left on. Make sure you sand the surchallenge dvery own till you gain a actual matte look.

Tip 2: Sand also a little more

You’ll now want usage 150 grit sandpaper and also sand until you obtain a surface that’s exceptionally smooth. After the surchallenge has actually been entirely sanded, wipe amethod the dust left behind with a damp towel or a clean cloth and also let the surchallenge to entirely dry.

Step 3: Mask the area

Using a high quality masking tape, you’ll want to mask anypoint you don’t desire accidentally painted. This can encompass points favor the edges of adjoining wall surfaces, the edges of your cabinets, the edges of a light switch, and also so on. Masking helps you gain that really clean, sharp look once you’re finimelted painting and every little thing is completely dried.

Step 4: Apply your primer

You have actually the alternative between a water-based or acrylic primer. Each of these primers work-related well and also have actually their pros and also cons. Both water-based and also acrylic primers produce the perfect isolating surface. After you have actually used the primer, and it’s fully dried, you’ll desire to go ahead and use a 2nd coat. It’s necessary to make sure you spanned eextremely single piece of latex possible.

See more: Children'S Book Review: Trapped Book Review S: Trapped, Trapped By Michael Northrop

Tip 5: Apply peak coat

You’ll need a container of oil-based height coat. This deserve to be purchased at many home improvement stores. After you have applied this solution, provide it enough time to dry, and if require be, apply another coat for superior coverage.

Step 6: Rerelocate all the masking tape

It’s best to remove all the masking tape prior to the paint fully dries. Rerelocating the masking after the paint has totally dried have the right to reason the paint to tear, break, or chip.

Can you paint latex over oil-based paint?

Now that you know how apply oil-based paint to latex, the question stays. Can you paint latex over oil-based paint? The answer is yes, but the point you haver to remember is, once you use latex over an oil-based paint, the just means to remove it is to sand it off. That deserve to come to be rather a nightmare, so make certain you acquire it ideal the initially time.

If you perform decide to use latex over an oil-based paint, you’ll also desire to make certain you sand also out any type of glossy areas of the surface, and make sure you use 100% acrylic latex. It’s additionally crucial to note that the even more you sand the surdeals with, the better the acrylic paint will stick to them. To successfully paint latex over oil-based paint:

Tip 1: Sand the surface

To ensure the surchallenge is completely sanded, and make sure you don’t see any type of type of shine. You’ll want to watch even more of a matte surface. This sanding must be done via a 150 grit paper.

Step 2: Mask the bordering area

To make sure you obtain sharp, clean-reduced edges, mask the surrounding location with a top quality masking tape. Rerelocate the masking tape once you’re done painting and also the paint is still moist. Like pointed out above, removing the masking tape as soon as the paint has actually fully dried have the right to chip, rip, or break the paint off.

Step 3: Apply latex ‘conversion’ primer paint

Once the surchallenge has actually been completely sanded, you’ll want to apply a layer of latex ‘conversion’ primer paint. Make sure you provide it adequate time to dry and also you cover all locations of the surconfront you’re painting.

Tip 4: Apply your oil-based paint

Lastly, use your oil-based paint and let it dry. When the latex ‘conversion’ primer and your oil-based paint mix, they permit your oil-based paint to adbelow with no issues.